Dynamic AR 500 is a medium-carbon, low alloy, quenched and tempered steel plate product achieving a minimum of 477-520 Brinell hardness (BNH).

Chemical Composition

C Mn P S Si Cu Ni Cr Mo B C.E.* (typical)
0.32 1.25 0.01 0.01 0.45 0.25 0.75 0.65 0.55 0.0 0.59

Mechanical Properties

Yield Tensile UTS 20°C (68°F) Elongation Charpy -40°C Hardness BHN
202 Ksi 230 Ksi 10% 25ft/lbs 490 -> 515

Formability

This material will withstand up to 4*t (up to 0.3125 » thick) and 6*t (0.3126 – 0.500 » thick) bending; however, larger bend radiuses are recommended to reduce the effect of cold working and highly localized residual stresses associated with bending.

Weldability

Dynamic AR 500 plates could be welded by common welding methods for high-strength medium-carbon steels. Appropriate heat input controls should be used to prevent localized overheating. Preheating (although not required) can be done to eliminate surface moisture and to reduce thermal gradient. Preheat temperatures should not exceed 400°F to avoid “softening” of Dynamic AR 500 plates.

Dimensional Information

Flatness Tolerance Available Gauges Available Widths Available Lengths
ASTM A6 or better 0.125″ – 0.500″ 36 – 60″ 48″ – 288″

For more information about Titus Steelworks’ Dynamic AR 500 steel, contact us today. We ship to US and Canada from our Cartersville, GA location.

Contact Us Today!